Rhinestone Swirl Pendant

Unique Crystal Rhinestone Swirl Pendant You Can Make

Looking for a unique piece of jewelry that screams you? You can create this easy rhinestone swirl pendant following our easy instructions. 


For this project, I used:
 

• 6 Crystal AB 16ss Swarovski Elements Rose Montees
• Jewelry Wire (20 gauge)
• Jewelry Pliers (needle nose, wire cutter and round)
• Gem Tac

Cut a piece of wire about 8 inches long. On one end, fold the end down to make a very small loop. Begin to bend the wire in a circular pattern making it a little larger as you circle around. Once you get to the desired size, slip your Swarovski Rose Montees into place and secure with a bit of Gem Tac . Let dry for 24 hours.

Once dry, you need to make the loop for the pendant. Using your needle nose pliers, bend the free end of the pendant at a 90 degree angle.  Grab the wire with the rounded pliers and again using your fingers wrap the wire around the pliers creating your loop. Holding the loop secure with the needle nose pliers, wrap the remaining wire around the bottom of the loop several times. Cut the remaining wire with your side cutters and tuck in the end of the wire.

String a chain through, and you have a unique, one-of-a-kind rhinestone pendant. Use a tighter loop and attach to ear wires for earrings. Experiment and try different shapes.

When you want to buy quality embellishments, trust Rhinestones Etc. We have a large inventory of hotfix and flatback bedazzling gems. Browse our collection to find your color and size.